5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
This module is based on the Omron G3MB SSR relay, which can control up to 2A at 240VAC. It has one SSR relay channel with three terminals: NO (Normally Open), COM (Common), and NC (Normally Closed).
A Solid State Relay (SSR) works like a mechanical relay, but it uses a low-level trigger signal. This means that the relay will turn on when the input logic voltage is LOW (Digital 0). An SSR has some advantages over a mechanical relay, such as no noise and longer lifespan.
When the input signal is applied to the coil, the NC terminal disconnects from the COM terminal, breaking the circuit. At the same time, the NO terminal connects to the COM terminal, completing the circuit. Depending on how you wire the module, this will turn the connected load on or off.
Input parts :
- DC+:Â connect power positive
- DC-:Â connect power negative
- CH1:Â relay module signal trigger point (Effective low-level trigger)
Note:Â Power must be DC voltage and need to be consistent with the voltage relay. The Board is available in Red Color.
Specifications
Part Number | G3MB-202P |
Trigger Voltage (VDC) | 5 |
Trigger Current (mA) | 2 |
Working Current(mA) | 12.5 |
Switching Voltage (VAC) | 240@2A |
Length (mm) | 25 |
Width (mm) | 34 |
Height (mm) | 25 |
Weight (gm) | 13 |
Shipment Weight | 0.017 kg |
FeaturesÂ
- Has been assembled, and the electrical test passed.
- It can be controlled directly by Microcontroller.
- Input control signal voltage:
- 0-2.5V status low level, relay OFF.
- 3-5V status high level, relay ON
Package IncludesÂ
1 x 5V 1 Channel SSR Solid State Relay Module
Dhananjay Patil (verified owner) –