Product Description
This text describes the TB6600 stepper motor driver controller 4.5A 8~50V TTL 16 Micro-Step CNC Single-Axis, which is based on the TB6600HG chip and replaces the previous model BL-TB6560-V2.0.
This driver controller can be used to build both amateur and professional CNC systems that require high power engines. It has several advantages over the older generation of the TB6560AHG, such as higher output power (200W vs 100W), higher operating voltage (50V vs 35V), and higher operating current (4.5A vs 3A).
The driver controller features intelligent current control and PWM modulation, which allow it to adapt to any stepper motor with different voltage and current ratings. The chip will automatically limit the maximum current to a fixed level.
The maximum operating frequency has been increased.
Features :
- The output current is infinitely adjustable to meet your various application requirements.
- Automatic half current function. And a semi-automatic flow switch, easy to use.
- The use of high-speed optical coupling 6N137 ensures high-speed without losing a step.
- Print on the back panel subdivides setup instructions.
- Used to increase the heat sink, good heat dissipation.
- Output short-circuit protection, the use of the mind.
- Using common anode input mode, there are two input terminals, wiring more convenient.
Specification-
Input Supply Voltage (VDC) | 8 ~ 50 |
---|---|
Operating Voltage (VDC) | 36 |
Max. Output Current (Amp) | 0.3 to 4.5 |
Micro Step | 1, 2, 8, 16 |
Maximum PWM frequency (Hz) | 2000 |
Hold Current Adjustment | 50% or 100% |
Operating Temperature Range (°C): | -10 to 50 |
Length (mm): | 82 |
Width (mm) | 50 |
Height (mm) | 30 |
Weight (g): | 120 |
Shipping Weight | 0.13 kg |
Shipping Dimensions | 9 × 6 × 4 cm |
Package Includes :
1 x TB6600 Stepper Motor Driver Controller 8~50V 4.5A