The Cube Orange Plus with ADSB Carrier Board is a flight controller that has an H7 processor and a 1,090 MHz ADS-B receiver from Avionic. It can automatically avoid aircraft by integrating with the new ADS-B carrier board. The pilot can set an exclusion zone for the autopilot through the parameter setting, and the cube will steer the vehicle away from any aircraft detected in that zone.
The Cube Orange
- Cube Orange targets education, amateur drone lovers, and professionals with cost-effective flight control hardware.
- Includes new generation of more powerful H7 processor, with stronger performance, faster processing, and increased security with built-in
- triple-redundant sensors, temperature control shock absorption IMU.
- With the help of flight software, Cube Orange can completely fly any remotely controlled aircraft, helicopter or multi-rotor vehicle and turn it into a more professional UAV platform.
ADS-B Carrier Board
- A standard carrier board with an integrated 1090MHz ADS-B receiver allows the software to receive information about the location of manned aircraft in the area.
- Receives information such as position, altitude, speed, etc, which can all be viewed in Mission Planner.
- Through settings, you can optionally set up your cube to allow the vehicle to automatically avoid aircraft that is within an exclusion zone set by you
Features:
- Built-in IMU Heating system, allowing flights at extreme temperatures (below freezing)
- Robust DF17 Interface connectors give enhanced drop and shock resistance
- Air-frames: VTOL, Plane, Multi-copter, Traditional Heli, Rover, Boat, Sub, General Robotics
specification-
Supported RC signals | PPM/SBUS/DSM |
---|---|
Power redundancy | Triple redundancy |
Sensors | Triple IMU System |
Sensors details | IMUl(lsolated) ICM42688 IMU2(1solated) ICM20948 or ICM42688 IMU3(Fixed) ICM20649 or ICM45686 MS5611x 2(Baro) |
Supported firmware Ardupilot | PX4, and Hionos 00-178C |
Supported vehicle type | Fixed-wing plane Multicopters Helicopter VTOL-plane Rover/boat/submarine |
Weight (gm) | 73 |
Chassis Material | CNCAluminum Alloy(cube) +ABS Molding(Carrier Board) |
Cube Size (mm) | 38.4 x 38.4 x 22 |
Carrier Board Size (mm) | 94 x 44.3 x 7.3 |
Operating Temperature | -10+55° IMU with temperature control |
PWM I/Os | 14 |
GPS/Serial interfaces | 4 |
Debug interface | 2 |
I2C interface | 2 |
CAN FD interface | 2 |
Shipping Weight | 0.335 kg |
Shipping Dimensions | 17 × 10 × 7 cm |
Packages Includes:
1 x The Cube Orange Plus with ADSB Carrier Board
Kit Included
1x Cube Orange+
1x ADSB Carrier Board
1x Power Brick Mini
1x I2C Board
1x Buzzer Cable
2x CAN Cable
1x Power Brick Mini Cable
1x GPS1 Cable
1x Micro USB Cable
2x I2C Cable
4x Mounting Screw
3x 3M Large Sticker
2x 3M Medium Sticker
4x 3M Small Sticker
Reviews
There are no reviews yet.