5V 1 Channel Without Light Coupling Relay
The 5V 1-Channel Relay Module without light coupling is designed for various applications. Here are its specifications:
– Supply Voltage: 5V
– Logic Signal Voltage: 3.3V or 5V
– Quiescent Current: 2mA
– Current When the Relay is Active: Approximately 70mA
– Maximum Contact Voltage: 250VAC or 30VDC
– Maximum Current: 10A
The relay normally opens the interface, with a maximum load of AC 250V/10A or DC 30V/10A. It has a trigger current of 5mA and operates at a module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set either a high level or a low level. The module’s fault-tolerant design ensures that even if the control line is disconnected, the relay will not move. Additionally, it features status indicators: a green power indicator and a red indicator for the 1-channel relay status. All module size interfaces can be directly connected through the terminal block, making it convenient and practical.
Features:
- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 1 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
Specification:
Operating Voltage (VDC) | 3 ~ 5 |
---|---|
Trigger Voltage (VDC) | 5 |
Trigger Current (mA) | 20 |
Switching Voltage (VAC) | 250@10A |
Switching Voltage (VDC) | 30@10A |
Operating Temperature (°C): | -40 to 85 |
Opt. Relative Humidity(RH) | 20% ~ 85% |
Storage condition (℃) | – 65 to 175 |
Length (mm): | 43 |
Width (mm): | 26.3 |
Height (mm): | 17 |
Weight (g): | 14 |
Shipping Weight | 0.018 kg |
Shipping Dimensions | 8 × 5 × 2 cm |
Package Includes:
1 x 5V 1 Channel Without Light Coupling Relay.
Reviews
There are no reviews yet.