CUAV V6X Flight Controller
The CUAV V6X Flight Controller heralds a new chapter in Pixhawk technology, co-developed by CUAV and PX4. It conforms to the Pixhawk FMU V6X standard, emphasizing supreme security and stability for unmanned aerial vehicles (UAVs).
At its heart, the V6X boasts an H7 double-precision floating-point arithmetic unit paired with a Cortex-M3 coprocessor, each with its own bus and power supply system. This design ensures strong performance and dependability during flight.
Featuring three redundant IMUs and factory-calibrated IMU temperature technology, the V6X delivers accurate and reliable flight dynamics. The addition of dual redundant barometers further bolsters altitude sensing reliability.
The controller’s extensive expansion capabilities are highlighted by the inclusion of a 100M Ethernet PHY, facilitating rapid communication with mission computers, fiber optic inertial navigation systems, high-end surveying and mapping cameras, and other industrial equipment mounted on UAVs. This caters to the needs of sophisticated UAV operations.
In summary, the CUAV V6X Flight Controller establishes a new benchmark in UAV technology, providing unparalleled security, stability, and scalability for advanced aerial tasks.Features:
H7 Double Precision Floating-Point Arithmetic Unit Processor
Using STM32H753IIK6 processor, double precision floating point arithmetic unit (DSP&FPU), the main frequency up to 480MHz; 2M FLASH,1 MB RAM; For CUAV V6X Flight Controller to bring powerful computing power, rapid data processing ability, for more functional development and flight stability to provide more possibilities.
M3 Coprocessor to Enhance the Expansion Capacity
The high-performance ARM® Cortex®-M3 coprocessor adds more security and external scalability capabilities to UAVs.
Multiple Redundancy Design Ensures Flight Safety
With three redundant IMUs and two redundant barometers on separate buses, when one set of IMUs fails, the system seamlessly switches to another reliable IMU, making the flight safer
Integrated 100M Ethernet Interface
High-speed communication with task computers through Ethernet; In the future, high-end links, INS, and high-end mapping cameras can be connected through Ethernet to meet the needs of high-end UAVs.
Adapt to More Complex Magnetic Environments
In order to adapt to the complex magnetic field environment, the RM3100 magnetic compass is selected, which supports the GPS direction-finding function, and completely solves the trouble of magnetic compass interference.
Pixhawk V6X Autopilot Flight Controller Modular Design
The CUAV V6X Flight Controller adopts a modular design, and the core module contains the processor and all IMUs. Users can design their own baseboard according to the design reference, to meet the personalized customization needs.
Compatibility with PX4/ArduPilot All Models
CUAV V6X Flight Controller supports all models for PX4&ArduPilot firmware,3-8 Copter/Plane/Helicopter/VTOL/unmanned vehicle/Rover, etc.
Specification:
Processor | STM32H75311K6 |
---|---|
Accelerometer& Gyroscope | ICM42688-P ICM-20649 BMI088 |
Compass | RM3100 |
Barometer | 2×1CP-20100 |
PWM I/O | 16 |
Power | 42 for UAVCAN, 2 for SMBUS (12C) |
GPS | 2, 1 GPS port with 12C and safety switch (GPS1), 1 interface with 12C and GPS (GPS2) |
TELEM | 3 |
CAN | 2 |
PPM RC | 1 for PPM receiver |
SBUS/DSM/RSSI | 1 for SBUS/DSM/Spektrum in and Analog (3.3V)/ PWM input |
SBUS outs | 1 |
FMU Debug | 1 |
10 Debug | 1 |
Ethernet | 1 |
SPI EXTERNAL1 | 1 (SPI6 interface, for expanding external sensors) |
ADIO | 1 AD3.3/ADC6.6 |
UART4 | 1 |
USB | 2, 1 for Type C, 1 for GH interface USB |
Operating voltage | 4.75~5.45V |
Servo input voltage | 0~9.9V |
Operating temperature | -20~85 |
Packing Includes:
1 x Pixhawk V6X Autopilot
1 x PW-Link Module
1 x CAN PMU Lite Module
1 x CAN/12C Estension board
1 x TYPE-C Cable 100cm
1 x RSSI Cable 30cm
1 x DSM RC Cable 30cm
1 x SBUS RC Cable 30cm
1 x PPM RC/SBUS OUT Cable 30cm
1 x Ethernet Cable 40cm
1 x CAN Cable 30cm
1 x TELEM Cable 30cm
1 x UART4 Cable 30cm
1 x UATR4->12C Cable 30cm
1 x ADIO Cable 30cm
1 x Debug Cable 30cm
1 x SP16 Cable 30cm
1 x GPS Cable 30cm
1 x memory card
Reviews
There are no reviews yet.