DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
This DC 12V Switch Delay-Relay Module with Adjustable Delay Time 0~25 Second Signal Triggering Switch Module is based on the NE555 Timer IC with high-performance timing CPU design. The power indicator LED and switch trigger timing indication LEDs.
Timing from microseconds to long hours. Applicable to vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices.
This is a monostable generator based on the NE555 integrated circuit. It has an adjustable delay time from 0 to 10 seconds using the potentiometer or by changing the capacitance. It is also capable of controlling the device below 220V/10A.
The NE555 is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For a stable operation as an oscillator, the free running frequency and duty cycle are accurately controlled with two external resistors and one capacitor. The circuit may be triggered and reset on falling waveforms, and the output circuit can source or sink up to 200mA or drive TTL circuits.
Precision Pulse Generation / Timing.
Adjustable Duty Cycle.
Monostable Operation.
Standby no power consumption
Excellent temperature stability 0.005% / oC
Countless Application and Information Sources.
Module supplies a diode with an anti-power reverse connection.
Time can be adjusted by a potentiometer, the default is 0-25 seconds.
Module signal side design has optocoupler isolation, anti-interference ability can adapt to the high-low level two kinds of control signal application, suitable for industrial control.
Module can be triggered repeatedly (such as setting delay 10S in a 10S trigger delay occur again within the trigger action, in action again re 10S delay, with delay, in the end, is not the last trigger prevail, back and delay 10S, until it reaches the delay time to trigger the whole process time delay. After the delay, it is triggered again and again.
Applications
Can be used for robots
Automotive lights
Intelligent product development
Automation equipment
PLC development
Smart home
Anti-theft alarm
Electronic development and so on.
Specifications:
Chipset | NE555 |
---|---|
Input Supply Voltage (VDC) | 12 |
Trigger Voltage (VDC) | 12 |
Switching Voltage (VAC) | 250@10A |
Switching Voltage (VDC) | 30@10A |
Adjustable Time(s) | 0 to 10 |
Maximum Load(W) | 2200 |
Fmax(KHz) | 500 |
Length (mm): | 76 |
Width (mm): | 17 |
Height (mm): | 17 |
Weight (g): | 18 |
Package Includes
1 x DC 12V Switch Delay-Relay Module with Adjustable Delay Time 0~25 Second
Krishna Reddy Mittapalli (verified owner) –