0.96 Inch I2C/IIC 4pin OLED Display Module
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel display
This 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 128×64. The package includes display board, display, 4 pin male header pre-soldered to board.
OLED monochrome 128×64 dot matrix disp
lay module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle
, wide temperature range and low power consumption.
Interface pin for 4 PIN 128×64 OLED
GND : Ground
VCC: 3.3 volts – 5 Volts
SCL: Serial Clock
SDA: Serial Data
Features of 4 pin 128 x 64 OLED Display-
Super High Brightness (Adjustable)
Super High Contrast (Adjustable)
Embedded Driver/Controller
Display size: 0.96″
Resolution radio:128 x 64
Interface modes: I2C/IIC
working voltage: 3.3V
Control Chip: SSD1306
Specifications:
Pixel Colour | Blue |
---|---|
Resolution | 128 x 64 Pixels |
Active Display Area | 21.74 x 10. 86mm |
Driving Voltage | 3.3-5V |
Operating Temperature | -40º~70º Celsius |
Interface Type | I2C IIC |
Length (mm): | 27.5 |
Width (mm): | 27.5 |
Height (mm): | 11 |
Weight (g): | 7 |
Package Includes
1 x 0.96 Inch I2C IIC 4pin OLED Display Module BLUE
* Product Images are shown for illustrative purposes only and may differ from actual product.
Ashok Shankar Das (verified owner) –
very nice
Hasan Junaid SMART SYSTEMS (verified owner) –
bought 50 pcs not yet tested single one.
Rajan Singh (verified owner) –
Item received was well packed and good.