The 5010 750KV High Torque Brushless Motor for drones features self-cooling technology, allowing it to withstand temperatures up to 140°C (356°F). It can produce up to 1500 grams of thrust with a 4S LiPo battery.
This motor is known for its high torque, providing an excellent flight experience thanks to NdFeB magnets and high-quality, well-lubricated ball bearings. It can be paired with 14” to 16” orange series propellers and powered by 2S-6S orange LiPo batteries through a 20A-40A ESC.
The motor is equipped with high-temperature wires in the windings to prevent burning and uses high-temperature adhesives to secure the stator windings, preventing them from shifting, getting pinched, or shorting out.
Features :
- Equipped with four fan-style cooling holes that pump air through the motor while it runs.
- Rear threaded mounting holes with both 16 mm and 19mm hole spacing fits a variety of applications.
- NdFeB magnets with a high-temperature rating for trouble-free operation.
- 140° C high temperature rated wire is used for winding the motors.
- Plates are epoxy coated on the inner surface to prevent winding short out.
- Lubricated ball bearings are used to support the motor.
- High-temperature adhesives are used to secure the stator windings and prevent them from shifting, getting pinched or shorting out.
specification-
| Motor KV (RPM/V) | 750 |
|---|---|
| Required ESC (A) | 20 ~ 40 |
| Compatible LiPO Batteries | 2S ~ 6S |
| Maximum Thrust (gm) | 1500@4S |
| Shaft Diameter (mm) | 4 |
| Compatible Propellers Size (inch) | 14 ~ 16 |
| Length (mm) | 50 |
| Width (mm) | 50 |
| Height (mm) | 10 |
| Weight (gm) | 112 |
| Shipping Weight | 0.12 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
Package Includes :
1 x 5010 750KV High Torque Brushless Motor for Drone
3 x Male Female Golden Connector Pairs with Heat Shrink Tube.
1 x Propeller Mount with Accessories.
Reviews
There are no reviews yet.