PRODUCT DESCRIPTION
Trigger board 5a, usb type-c, pd, decoy, 5v 9v 12v 15v 20v, output pd 2.0 3.0, trigger adapter, cable connection polling detector
explanation:
-Pd2.0/3.0 decoy.
– Often used to trick the corresponding voltage using power banks with PD protocol, such as power banks and chargers, to power notebooks and routers.
function:
1). Supports PD3.0 and PD2.0 voltage cutoff output, modes can be switched freely.
2). There is a key lock function to prevent accidental operation.
3). There is an LED output indicator to show the working status.
Parameters are automatically saved and the last decoy settings are executed when the power is turned on again.
Five). Ultra low power consumption, support 100w output.
Instructions for use (need to use PD protocol power supply):
1). Hold the S button and insert the module into the power supply, then reset it to 5V output (“>>” means power on).
2). Press and hold the S button, then insert the module into the power source. At this time, switch whether the key lock is on or not, and save the state after power-on.If the key lock is unlocked. To prevent accidental operation, the lock must be unlocked to adjust the voltage after power on.
3). Once powered on, press and hold the button. Once the button is locked, press the button to unlock it.
Four). After powering on, press and hold the button, then press the button to lock the button.
Five). Quick Start: Connect the board to PD power. At this time, the LED light will indicate the currently set decoy voltage. If not turned on, it will default to 5v. Adjust the output voltage. The board is locked by default and must be unlocked first. This method involves holding down the s button and then pressing the s button. At this point the unlock is complete and you can release the button. Click the [s button] to increase the voltage, or the [s button] to decrease the voltage.
How to use the test function
1). Press the S and S buttons at the same time and then turn on the power, the module will enter test mode. Output voltage will automatically cycle from 5v>9v>12v>15v>20v. The voltage change time can be adjusted in seconds using the s and s buttons.
2). This feature is a test feature and modes are not saved to save switching time.
Interface description:
1.Type-C interface male: Type-C male connector: Connect the PD power supply as input. Can input voltage and current of 20v 5a.
2.Type-C interface female: Used as an input to connect to PD power supply or as an output interface that can output 20V 5A voltage and current.
3. USB-A female interface: As an output interface, it can output 20v 3a voltage and current.
4.Positive and negative wiring pads: As an output interface, it can output 20v 5a voltage and current.
Specifications:
Feature | Specification |
---|---|
Supported Protocols | PD 2.0/3.0 |
Voltage Output | 5V, 9V, 12V, 15V, 20V (Adjustable) |
Maximum Current Output | 5A |
Voltage Input | 20V |
Input Interface | Type-C (Male) |
Output Interfaces | Type-C (Female), USB-A (Female), Positive/Negative Wiring |
Key Lock Function | Yes |
LED Indicator | Yes |
Power Consumption | Ultra-low |
Test Mode | Yes |
Test Mode Voltage | 5V, 9V, 12V, 15V, 20V (Automatically Cycling) |
Test Mode Adjust Time | Adjustable |
PCB Material | Not Specified |
Dimensions | Not Specified |
Weight | Not Specified |
package Include-
1 X Type-C Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
Reviews
There are no reviews yet.